Minelab Equinox 600 / 800 Coil Yoke Strengthener and Repair for 11''

Please Note: The 11" coil supports are designed for the old style 11" Equinox 600 and 800 coil. Minelab has modified the 11" coil that ships with the Equinox 700 and 900 and also any equinox 600 / 800 bought after the end of 2023 the new style coils come with the thread already in the coil which will stop these from fitting , we do have stiffeners available for the newer coils the 11" coil support will not fit the EQUINOX 700 and EQUINOX 900 or equinox 600 / 800 bought after the end of 2023 11" coil. This coil support is designed to fit on you Equinox metal detector 11” search coils. It is 3-D printed From Strong PETG material and at a very low print speed to ensure maximum strength unlike others that are available. Designed to give your coil ears extra support to prevent them from breaking. This coil support is a great investment for protecting your coil and making the life span of the coil much longer. For a better level of protection, we advise you to either zip tie support to coil at the groove on each side of the base of the support or apply a two-stage epoxy designed for use on plastic on the bottom of the coil support so it will adhere to the coil (gluing may void coil's warranty). Also doubles up as a coil repair kit. If your lugs fail in the field you can simply zip tie this one via the holes we have made in the stiffener over your broken lugs and your set to go Comes with 6 months warranty and free zip ties